Install the sensor in the middle of the duct.
The preferred position of the sensor is after a filter.
Place the sensor in front of the diffusers at a position with high air velocity.
Place the sensor at a position with laminar (non turbulent) flow. Turbulence appears after fans as well as after bends, junctions, air heater, air cooler, filters, flaps or diameter changes in the duct.
Please avoid the below examples:
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article