Select a Suitable Location: Choose a location for the PT100 temperature probe that accurately represents the temperature of the asset you want to measure. Ensure that the location is accessible for maintenance and calibration purposes. Please avoid any contact from the Probe Metal Part with any part from the equipment that can cause movement or components that generate heat or cold.

Equipment Access Hole for external probes:  If the equipment is closed or watertight (e.g. Freezers, Ultrafreezers, Cryopreservation tanks) make sure there is an access hole to insert the probe. 

An alternative to the access hole, in the case of refrigeration equipment, is to use the drainage hole that exists to collect the water that condenses inside (a hole that typically exists at the bottom of the equipment, below the heat exchanger).

Mounting the Probe: Depending on the application, you may need to mount the PT100 probe using a threaded fitting, compression fitting, metal bracket or zip ties. 

Secure the Probe: Once properly positioned, secure the PT100 probe in place using appropriate fixtures or fasteners. Make sure the probe is firmly attached to prevent movement or impacts from the load/unload process of the assets stored inside the equipment that could affect accuracy.

Connect Wiring: Connect the wiring of the 4-wire PT100 probe to the AiroSensor X ER (202043). Ensure that connections are tight and secure to prevent data loss. Please use the Con-Clip provided.

Testing: After installation perform testing to verify that the PT100 probe is functioning correctly. Login ViGIE Web Portal and find your probe data.

By following these installation guidelines, you can ensure the proper installation and operation of your PT100 temperature probe for accurate temperature measurement in your application.